当前位置: Home / Faq / Air separation parts FAQ /

How should the molecular sieve adsorption purification process be operated when the air separation equipment resumes power supply after a power outage?

How should the molecular sieve adsorption purification process be operated when the air separation equipment resumes power supply after a power outage?
Jun 18, 2024
Author: DEAR AST

When the air separation equipment of the molecular sieve adsorption purification process resumes power supply after a power outage, the operation should follow the following steps:
1) Make judgments on the potential impact on mechanical equipment such as air compressors in the event of a sudden power outage. If there is no impact, prepare for the start of the air compressor according to the operating procedures of the air compressor;
2) Check and confirm the opening and closing status of equipment valves for chain shutdown;
3) Check and confirm the alarm interlocking items of the air separation device. Recalibrate and confirm the chain control that fails during power outage;
4) Start the air compressor and air pre cooling system according to regulations;
5) Start the molecular sieve adsorber according to the regulations. Continue to complete the pre shutdown procedure. If the shutdown time is long (more than 24 hours), the molecular sieve adsorber should be recycled for one cycle;
6) Based on the length of downtime, the cold end temperature of the main heat exchanger, and the main cold liquid level, determine the starting steps of the air separation equipment according to regulations.

DEAR Air Separation Solve YourHow should the molecular sieve adsorption purification process be operated when the air separation equipment resumes power supply after a power outage?You can also learn about otherAir separation parts FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
Centrifugal compressor, sometimes suddenly produce strong vibration in the production process, gas medium flow and pressure also appear substantial pulsation, and accompanied by periodic dull "call" sound, as well as airflow fluctuations in the network caused by "huffing" "huffing" strong noise, this phenomenon is known as the centrifugal compressor wheezing conditions in small air separation unit. According to the prod...
2025.09.04
In the air separation unit, low-temperature liquid is transported by centrifugal cryogenic pump. In order to ensure the reliable operation of the equipment, two sets of low-temperature pumps are generally equipped, one for use and one for standby. During normal operation, the main pump runs at full load, and the standby pump is in standby state under low load operation. Since the working medium temperature of cryogenic liquid pump is about -180°C, the working pressure is very high, and the pump body is installed in the cold box. When the pump fails, it is extremely difficult to maintain. Therefore, how to maintain the stable and reliable operation of cryogenic liquid pump is of great significance.
2025.09.03
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top