当前位置: Home / Faq / Small air separation FAQ /

What is bare cooling in air separation equipment and why it is necessary to perform bare cooling

What is bare cooling in air separation equipment and why it is necessary to perform bare cooling
Jun 01, 2023
Author: DEAR AST

After all the pipelines, valves, and on-site installed air separation equipment in the tower are installed, fully heated, and blown out, they are driven and frozen without filling the cold insulation material in the cold insulation box, which is called "bare cooling".

Bare cooling is a low-temperature assessment of air separation equipment. Its purpose is to:

1) Inspect the installation or overhaul quality of the air separation equipment. For example, check if there are any leakage points at the pipeline welds and flange connections;

2) Inspect the cold deformation and compensation ability of air separation equipment, pipelines, and valves under low temperature conditions;

3) Check whether the equipment and pipelines are unobstructed and correct;

4) Further tighten the mating flange screws at low temperatures to ensure no leakage at low temperatures.

Therefore, bare cooling is an indispensable process for equipment installed on site, which should be given sufficient attention after installation and before formal testing.

DEAR Air Separation is a professional research and development, manufacturing, and installation of various complete sets of air separation equipment. With unique design and insights into air separation industry solutions, we provide customers with safe and reliable products.

DEAR Air Separation Solve YourWhat is bare cooling in air separation equipment and why it is necessary to perform bare coolingYou can also learn about otherSmall air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
 The purpose of the blowing is to clean out the residual slag, aluminium chips and other debris from the piping and vessels. the air source for blowing is provided by the turbine compressor, and the air cooling tower must be activated. 3. blowing principle, first outside the tower, after the tower, blowing brush to be one after another, in the blowing with the air pressure: low pressure system. Should be maintained at 40 a 50kpa high pressure system: should be maintained at 250 ~ 400k...
2025.07.23
Due to improper adjustment of seal gas pressure during operation, liquid oxygen pump can not pump liquid or leak.   From the quality point of view, when the sealing pressure is too high, there will be gas leakage into the pump through the labyrinth seal, resulting in the impeller with gas or even idling, resulting in liquid injection or pressure drop; when the air pressure before sealing is too low, there will be liquid oxygen leakage.   From the quantity point of view, when (p1-p3...
2025.07.22
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top