当前位置: Home / Faq / Biogas purification FAQ /

What are the requirements for safety technology management of gas cylinder filling units

What are the requirements for safety technology management of gas cylinder filling units
Apr 25, 2025
Author: DEAR AST

1) The station must be established after being reviewed and approved by relevant departments in accordance with the provisions of the "Regulations on the Safety Management of Hazardous Chemicals" and the "Regulations on the Safety Supervision of Gas Cylinders" promulgated by the State Council;

2) The filling station shall go through the registration formalities with the boiler and pressure vessel safety supervision institution of the labor department, and can only engage in gas filling work after passing the on-site assessment;

3) The production equipment, buildings, and safety facilities of the filling station must comply with the regulations on fire prevention, explosion prevention, and environmental protection;

4) The filling station must establish a management system to ensure filling quality and safety, such as safety education, training, fire and explosion prevention, storage and transportation, and equipment maintenance systems, and have technical data such as standards and specifications related to the filled gas and gas cylinders;

5) The filling station should have facilities that meet the requirements of environmental protection, public security, labor, and other departments to replace or handle flammable and harmful gases in the bottle;

6) The filling station should have a workshop, site, filling equipment, safety facilities, as well as laboratory and detection instruments and tools appropriate to the type and output of the gas filled;

7) According to the specific regulations of GBl894, safety signs should be set up at eye-catching places inside and outside the filling station according to the gas characteristics;

8) The filling station shall be equipped with a full-time technical director with a technical title of engineer or above (including engineer);

9) The filling station should be equipped with full-time safety officers with a high school education or above and qualified in professional technical training;

10) The filling station should be equipped with gas filling inspectors, product quality testers, and cylinder administrators with a junior high school education or above and qualified in professional technical training;

11) The filling station should be equipped with gas filling personnel with a junior high school education or above, who have received professional technical training and passed the assessment by the local labor department, and there should be no less than two gas filling personnel per work shift;

12) Personnel engaged in loading, unloading, transporting, and receiving and dispatching gas cylinders at the filling station should master the relevant safety knowledge, regulations, and standards for the filled gas and its cylinders.

DEAR Air Separation Solve YourWhat are the requirements for safety technology management of gas cylinder filling unitsYou can also learn about otherBiogas purification FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
In the air separation unit, low-temperature liquid is transported by centrifugal cryogenic pump. In order to ensure the reliable operation of the equipment, two sets of low-temperature pumps are generally equipped, one for use and one for standby. During normal operation, the main pump runs at full load, and the standby pump is in standby state under low load operation. Since the working medium temperature of cryogenic liquid pump is about -180°C, the working pressure is very high, and the pump body is installed in the cold box. When the pump fails, it is extremely difficult to maintain. Therefore, how to maintain the stable and reliable operation of cryogenic liquid pump is of great significance.
2025.09.03
The brief introduction of the air filter and air compressor in this process is the same as that of the chilled nitrogen production process. 1. Cold dryer: it is an air separation equipment used to reduce the temperature of compressed air before entering the air drying purifier to extract oil and water. It usually adopts post cooler with the structure of column pipe type, casing type, cooling sheet type and so on. 2. Oil-water separator: its function is to separate the oil and moisture contained in the compressed air and make the compressed air get Primary purification. 3. Air drying purifier: Compressed air still contains certain moisture after passing through the post cooler, and its content depends on the temperature of the air. The drying process of compressed air generally adopts molecular sieve absorption method and freeze drying method. 4. Pressure conversion absorption nitrogen generation device: the adsorbents used are usually 5A Molecular sieve or carbon molecular sieve, an...
2025.09.02
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top