当前位置: Home / Faq / Small air separation FAQ /

What safety precautions should be paid attention to when the air separation unit is stopped to discharge low-temperature liquid

What safety precautions should be paid attention to when the air separation unit is stopped to discharge low-temperature liquid
Jan 17, 2023
Author: DEAR AST

The liquid oxygen in the air separation equipment and the oxygen content in the liquid air are high. After evaporation in the air, the oxygen concentration in the local range will increase. If there is fire, there is a risk of combustion and explosion. A chemical fertilizer plant once exploded and injured people because it discharged a large amount of liquid oxygen into the trench and encountered welding sparks. Therefore, it is strictly forbidden to discharge liquid into the trench at will, and it should be discharged into the liquid evaporation tank or special low-temperature resistant metal drain pit through pipes. The discharge pit shall be kept clean frequently and no organic matter or grease is allowed to accumulate. When discharging liquid, hot work is strictly prohibited around.

Contact of low-temperature liquid with skin will cause severe frostbite. In mild cases, the skin will form blisters, redness and pain; If it is heavy, it will freeze the internal tissues and bones and joints. If it falls into the eye, it will cause eye damage. Therefore, when discharging liquid, avoid direct contact with liquid with hands, and wear dry cotton gloves and protective glasses when necessary. In case of contact with skin, immediately wash with warm water (below 45 ℃).

DEAR air separation management is controllable, stable and safe, providing users with more timely and accurate technical support, finding possible problems as soon as possible and handling them in a timely manner.

DEAR Air Separation Solve YourWhat safety precautions should be paid attention to when the air separation unit is stopped to discharge low-temperature liquidYou can also learn about otherSmall air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
1. The removal of perlite site shall be supervised by full-time personnel and guided by professionals. The principle of who organizes, who takes responsibility shall be followed. There should be a safe passage and a warning line at the removal of perlite site, and it is strictly forbidden to enter. 2. Dry air shall be used to warm the sand during the removal and knock the cold box to remove the pearlite caking, so as to prevent equipment damage caused by falling caking. 3. The removal of perlite should be carried out in layers and sand holes should be opened at different heights of the cold box. (It can be adjusted according to the site conditions) 4. In the process of removal of perlite, always supervise the caking on the top and enter the cold box for cleaning at any time. 5. In case of severe weather such as rain, snow, strong wind or sand storm danger, the construction party and the owner shall jointly confirm that the sand stripping work shall be postponed. 6. Remov
2025.04.18
How to check if the cooling water circulation of the air separation equipment is fully connected?
2025.04.17
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top