当前位置: Home / Faq / Liquefied air separation FAQ /

Condensation temperature of oxygen nitrogen mixture

Condensation temperature of oxygen nitrogen mixture
Oct 19, 2022
Author: DEAR AST

Due to the interaction between oxygen and nitrogen molecules, the condensation temperature of oxygen nitrogen mixture at any concentration is not equal to the condensation temperature of pure oxygen or pure nitrogen, but between them. For example, at a standard atmospheric pressure, the temperature at which air begins to condense is 81.8k, which is lower than the condensing temperature of pure oxygen and higher than the condensing temperature of pure nitrogen.

The assembly process of DEAR: vertical assembly is adopted to ensure that the center of gravity between the cylinders is in a straight line and the perpendicularity of the cylinders. Filler: the plus aluminum alloy wave plate filler developed by Tianjin University is used. The original multi part packing is changed and the whole disc packing is used to reduce the filling error, improve the extraction accuracy and speed up the filling. Spring pin type tooling shall be installed at the edge of the packing plate, and the tooling shall be kept in a raised state when it is not filled, so as to facilitate the use of fixtures for hoisting; When filling, the pin drops so that the two plates of packing can be overlapped.

DEAR Air Separation Solve YourCondensation temperature of oxygen nitrogen mixtureYou can also learn about otherLiquefied air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
Generally, the actual cooling capacity of expander is always less than the theoretical cooling capacity. Under the same inlet and outlet pressure and inlet gas temperature, the lower the efficiency of expander, the smaller the unit refrigerant cooling capacity and the smaller the temperature drop efficiency of expander. The efficiency of expander depends on the size of various losses inside the expander. Due to the existence of various losses, the ability of gas to do external work is reduced in varying degrees. To sum up, the losses mainly include the following aspects: 1. When the air flow passes through the work wheel and the deflector, the loss caused by friction and air flow impact on the runner surface is called flow loss. 2. When the impeller is rotating, the friction heat generated by the gas around the wheel disc will increase the temperature of the gas, which is called friction blast loss. 3. When the gas passes through the deflector, the leakage from the gap bet
2025.11.07
The principle and function of molecular sieve purification system in air separation equipment?
2025.11.06
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top