当前位置: Home / Faq / High purity nitrogen air separation FAQ /

The principle of liquid air separation plant air compressor

The principle of liquid air separation plant air compressor
Apr 16, 2024
Author: DEAR AST

After the air compressor compressed and pre-cooled air, and then by the purification system to remove water, carbon dioxide and other harmful impurities, into the main heat exchanger cooling part directly into the lower part of the distillation tower. Another part of the liquefier in the liquefied also into the lower tower of liquid air separation plant, in the lower tower in the initial distillation, in turn to obtain high purity nitrogen with liquid nitrogen, dirty liquid nitrogen, poor liquid air, oxygen-rich liquid air, oxygen-rich liquid air, poor liquid air, dirty liquid nitrogen, after the cooler subcooling throttling to the upper tower, to participate in the distillation of the upper tower. Part of the nitrogen at the top of the lower tower is condensed into liquid nitrogen in the condensing evaporator, part of the liquid nitrogen is used as the reflux liquid in the lower tower and part of the liquid nitrogen is also throttled to the upper tower for further distillation after being sub-cooled by the cooler.

Dear Air's air compressor system encounters cold technology quality to meet the liquid air separation plant production .

山东传洋集团20000

 

DEAR Air Separation Solve YourThe principle of liquid air separation plant air compressorYou can also learn about otherHigh purity nitrogen air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
Answer: select the small cryogenic air separation unit with argon, and give priority to verifying the real continuous operation performance of the unit with argon below 1000nm ³/h, avoiding the scheme with only drawings and no long-term operation record. Key dimensions of model selection: 1. operation performance: it is confirmed that the manufacturer has a long-term stable production case of small flow air separation with argon. Deere air separation small-scale hydrogen free total distillation argon extraction air separation, supports scale customization below 1000nm ³/h, and is equipped with intelligent control system, with mature landing performance. 2. power consumption per unit liquid argon
2026.11.06
Answer: the default unit gauge pressure is MPa (g), and the mainstream is cryogenic full low pressure external compression process. Design pressure of conventional energy-saving models in the industry: 0.50~0.55 MPa (g); The lower limit of stability of ordinary process is about 0.45 MPa (g). In general, it is not recommended to be lower than 0.42 MPa (g) for a long time in the conventional scheme. If the pressure is too low, there will be risks such as poor heat exchange in the precooling tower, insufficient purification of molecular sieve, difficult to balance the cooling capacity, and the air compressor close to the surge area. The internal compressed air is distributed with a booster. The main air compressor is mostly 0.55~0.65 MPa (g), and the lower limit is mostly 0.50 MPa (g), which is difficult to achieve below 0.45MPa (g). Deere air separation ultra-low discharge pressure patented energy-saving external compression air separation, through the collaborative optimization of the w
2026.11.06
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top