当前位置: Home / Faq / Liquefied air separation FAQ /

LNG Cold Energy Utilisation Air Separation Unit

LNG Cold Energy Utilisation Air Separation Unit
Sep 01, 2025
Author: DEAR AST

LNG Cold Energy Utilisation Air Separation Plant is a liquid air separation plant for the utilization of LNG cold energy with a high utilization rate of cold energy, energy saving and environmental protection, high efficiency and safety factor.

Liquid air separation plant for LNG cold energy, including air compression pre-cooling system, purification system, air separation system, nitrogen circulation system. The nitrogen circulation system consists of a high pressure heat exchanger to recover the LNG cold, two low temperature circulation nitrogen presses and two gas-liquid separators, which are placed in separate cold boxes. The nitrogen is compressed by two low temperature circulating nitrogen presses and cooled to liquid nitrogen by heat exchange with LNG, which is separated into gas and liquid nitrogen in the gas-liquid separator. The gas nitrogen is returned to the compressor to circulate and compress the refrigeration liquid nitrogen, part of which is sent out as product and part of which is sent to the liquefier to heat exchange with part of the air, which is then liquefied and sent to the lower fractionation tower, where the cold volume of LNG is transferred to the liquid air separation plant . The liquid nitrogen is vaporised and reheated before being circulated.

DearAir manufactures advanced LNG cold energy utilization liquid air separation units.

252058689457107136

DEAR Air Separation Solve YourLNG Cold Energy Utilisation Air Separation UnitYou can also learn about otherLiquefied air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
Answer: select the small cryogenic air separation unit with argon, and give priority to verifying the real continuous operation performance of the unit with argon below 1000nm ³/h, avoiding the scheme with only drawings and no long-term operation record. Key dimensions of model selection: 1. operation performance: it is confirmed that the manufacturer has a long-term stable production case of small flow air separation with argon. Deere air separation small-scale hydrogen free total distillation argon extraction air separation, supports scale customization below 1000nm ³/h, and is equipped with intelligent control system, with mature landing performance. 2. power consumption per unit liquid argon
2026.11.06
Answer: the default unit gauge pressure is MPa (g), and the mainstream is cryogenic full low pressure external compression process. Design pressure of conventional energy-saving models in the industry: 0.50~0.55 MPa (g); The lower limit of stability of ordinary process is about 0.45 MPa (g). In general, it is not recommended to be lower than 0.42 MPa (g) for a long time in the conventional scheme. If the pressure is too low, there will be risks such as poor heat exchange in the precooling tower, insufficient purification of molecular sieve, difficult to balance the cooling capacity, and the air compressor close to the surge area. The internal compressed air is distributed with a booster. The main air compressor is mostly 0.55~0.65 MPa (g), and the lower limit is mostly 0.50 MPa (g), which is difficult to achieve below 0.45MPa (g). Deere air separation ultra-low discharge pressure patented energy-saving external compression air separation, through the collaborative optimization of the w
2026.11.06
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top