当前位置: Home / Faq / Small air separation FAQ /

Characteristics of centrifugal compressor wheezing phenomenon in small air separation unit

Characteristics of centrifugal compressor wheezing phenomenon in small air separation unit
Jan 06, 2022
Author: DEAR AST

Centrifugal compressor operation once the phenomenon of wheezing, the unit and the operation of the pipe network has the following characteristics.

(1) the gas medium outlet pressure and inlet flow rate changes significantly, sometimes may also produce gas backflow phenomenon. The gas medium is discharged from the compressor to the inlet, which is a dangerous working condition.

(2) Periodic vibrations in the pipe network, with high amplitude and low frequency, accompanied by a periodic "roar" sound.

(3) The compressor body vibrates strongly, the casing, bearings have strong vibration, and a strong periodic airflow sound, due to strong vibration, bearing lubrication conditions will be damaged, shaft tile will burn, or even shaft is twisted off, the rotor and stator will produce friction, collision, sealing components will be seriously damaged.

Once the compressor enters the wheezing condition, the operator should immediately take adjustment measures to reduce the outlet pressure, so that the compressor in small air separation unit quickly out of the wheezing zone, to achieve stable operation of the compressor.

主图

 

 

DEAR Air Separation Solve YourCharacteristics of centrifugal compressor wheezing phenomenon in small air separation unitYou can also learn about otherSmall air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
In case of sudden power failure during the operation of small air separation unit, the following steps should be followed:   First, open the vent valve (anti surge valve) of air compressor to prevent the air compressor from surging and causing the air compressor to reverse due to air backflow;   Then check whether the molecular sieve adsorber switch should be interlocked to close, if not, it should be man...
2024.11.21
How is the ratio of individual gases adjusted in an air separation plant?
2024.11.20
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top