当前位置: Home / Faq / Small air separation FAQ /

The purpose of water cooling tower of small air separation unit

The purpose of water cooling tower of small air separation unit
Mar 12, 2025
Author: DEAR AST

A water cooling tower is a hybrid heat exchanger. The purpose is to cool the air after the temperature of the cooling water in the cooling tower of small air separation unit to make the water temperature down, in order to be used for air cooling tower cycle. Different types of water cooling towers are seeking to enhance heat transfer, improve the cooling effect, while the flow resistance to be as small as possible, so that the water is not easy to scale.

In large and small air separation unit using a new type of packing tower, using Alpha Bauer ring, which has the advantages of large circulation, low resistance, good heat transfer and good strength. The heat transfer temperature difference at the hot end is around 0.5°C, and the negative temperature difference of the outlet water (water temperature is lower than the nitrogen temperature) can be 4 to 9°C, depending on the gas-to-liquid ratio.

Dear Air Separation achieves high quality development for small air separation unit and large air separation unit technology and continues to achieve new breakthroughs in technology.

缅甸1500 - 副本

DEAR Air Separation Solve YourThe purpose of water cooling tower of small air separation unitYou can also learn about otherSmall air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
The liquefaction of gases can be divided into forward and reverse cycles. The forward cycle process is the absorption of heat from the higher temperature external heat source and the release of heat to the lower temperature external heat source. The reverse cycle is when the mass draws heat from a lower temperature external heat source and releases it to a higher temperature external heat source. The forward cycle converts heat energy into mechanical energy and the reverse cycle converts mechani...
2025.09.26
Distillation is using the different boiling points of the two substances to condense the mixed steam and vaporize the mixed liquid repeatedly to achieve gas separation. For a mixed liquid composed of two substances with different boiling points, when the heat absorption part evaporates, the volatile components will evaporate more, while the mixed steam will give off heat and partially condense, the non volatile components will condense more. If the saturated steam with higher temperature is mixed with the saturated liquid with lower temperature, the steam will release heat and partially condense, and the liquid will absorb heat part of it evaporates. If after a round of partial evaporation and partial condensation, the steam and liquid with higher concentration will contact with the steam and liquid with different temperature respectively, and then partial condensation and partial evaporation will occur again. This process will be repeated for many times, and finally gas separation
2025.09.25
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top