当前位置: Home / Faq / Air separation FAQ /

Principles of air precooling

Principles of air precooling
Nov 18, 2021
Author: DEAR AST

Principles of air precooling

The temperature of the air compressed by the air turbine compressor rises to more than 80 ℃, which leads to the failure of the subsequent adsorption heat transfer link. The air inlet temperature of the air separation unit can be effectively reduced by setting the air precooling system.

 

Electrostatic deposition: electrostatic makes the dust change its moving track and collide with obstacles. Electrostatic force participates in the work of adhesion.

 

Kaifeng DEAR Air Separation industry Co., Ltd. is a major equipment manufacturer and gas supplier in China's air separation industry. So far, DEAR Air Separation has produced more than 300 sets of large and medium-sized air separation units for domestic and foreign customers. DEAR Air Separation is the first to build an intelligent air separation demonstration enterprise integrating intelligent production workshop, intelligent management and operation, and remote equipment monitoring.

 

DEAR Air Separation has been focusing on the manufacturing and service of large-scale air separation equipment and cryogenic air separation for nearly 20 years. It has rich project engineering experience, and constantly uses innovative technologies to optimize equipment energy saving and safety, so as to bring higher benefits to customers.

0-1

DEAR Air Separation Solve YourPrinciples of air precoolingYou can also learn about otherAir separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
The liquefaction of gases can be divided into forward and reverse cycles. The forward cycle process is the absorption of heat from the higher temperature external heat source and the release of heat to the lower temperature external heat source. The reverse cycle is when the mass draws heat from a lower temperature external heat source and releases it to a higher temperature external heat source. The forward cycle converts heat energy into mechanical energy and the reverse cycle converts mechani...
2025.09.26
Distillation is using the different boiling points of the two substances to condense the mixed steam and vaporize the mixed liquid repeatedly to achieve gas separation. For a mixed liquid composed of two substances with different boiling points, when the heat absorption part evaporates, the volatile components will evaporate more, while the mixed steam will give off heat and partially condense, the non volatile components will condense more. If the saturated steam with higher temperature is mixed with the saturated liquid with lower temperature, the steam will release heat and partially condense, and the liquid will absorb heat part of it evaporates. If after a round of partial evaporation and partial condensation, the steam and liquid with higher concentration will contact with the steam and liquid with different temperature respectively, and then partial condensation and partial evaporation will occur again. This process will be repeated for many times, and finally gas separation
2025.09.25
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top