Home / All Air Separation tags /

Stability of argon systems in small air separation units

Stability of argon systems in small air separation units
The high quality of the argon extraction rate of the air separation argon system mainly comes from the argon fraction of the upper tower, so the stability of the main tower working condition is the basis of the stability of the argon fraction, and the stability of the argon fraction is the basis of the stability of the operation of the crude argon tower.
Cases of Stability of argon systems in small air separation units
More
News of Stability of argon systems in small air separation units
More
Mar 06, 2026
Warmth and Care for Women, Craftsmanship Unfolds Their Beauty - DEAR Air Separation Held Women's Day Activities
Sep 01, 2025
DEAR Air Separation Successfully Signs All-Liquid Air Separation Equipment BOT Project To Inject New Momentum into Industrial Development in Xichuan
Solutions of Stability of argon systems in small air separation units
More
1500/100 Y-type solution for small air separation plant in new material industry
The new material industry system of our country has been initially formed and the development situation is good. With the introduction of national strategic planning such as "The development plan of national strategic emerging industries in the 13th Five-Year Plan" and "The development plan of new material industry in the 13th Five-Year PlanThe new material industry system of DEAR air separation has been initially formed and the development situation is good. With the introduction of national strategic planning such as "The development plan of national strategic emerging industries in the 13th Five-Years Plan" and "The development plan of new material industry in the 13th Five-Years Plan", it has created a good policy environment for the development of new material industry. Recently, DEAR air separation cooperated with clients on the 1500/100 Y-type project of small air separation plant. The overall design of the project is reasonable, and the one-time drive is successful, and all the
4500/4500-type solution for small and medium-sized air separation plant in nonferrous industry
According to the influence and reform of the general environment of the non-ferrous industry, the problems faced by this industry are becoming more and more serious, and the control of production capacity is particularly important. Recently, the 4500/4500 type small air separation equipment project signed with customers by DEAR Air Separation, through the trial run stage, all the technical indicators have reached or exceeded the design standard, and have been continuously sending nitrogen for several days, which has been well received by users.
Faq of Stability of argon systems in small air separation units
More
Air cooling column is a mixed heat exchange device. The function is to make the cooling water fully contact with the air and being mixed fully to increase the heat transfer area and enhance the heat transfer, usually using "packed column" or "sieve plate". The packed column is a round steel container with packing (ceramic ring, plastic ring, etc.). Cooling water is ejected from the top of the column and mixed with air flowing upward from the bottom for heat and mass exchange. Air transfers heat to the cooling water, lowering its temperature and raising its temperature. In order to prevent the generation of water droplets in the air, the raschig ring (or stainless steel wire mesh) packing separator (also known as trapping layer) and mechanical water separator (inertial separation) are usually installed on the upper part of the column. The cooling water ejected from the spray device flows downward to the packing layer through the distributor, and an overflow ring is provided to redist
Feb 25, 2026
When the exhaust temperature of the piston compressor is higher than the design value, the most direct impact is that the lubricating oil is carbonized, which leads to the compressor parts burned out because of not getting good lubrication. If the temperature of the compressor is too high during actual operation, the cause should be analyzed in time and corresponding preventive measures should be taken. The following methods can be used for reference in practice. 1. Reducing the inlet air temperature can directly reduce the exhaust temperature. Check the intercooler to ensure the cooling effect of the intercooler. 2. The installation of the valve and the selection of the spring should be standardized to ensure the normal operation of the valve and minimize the loss of inlet and outlet pressure. 3. Strengthen the cooling of cylinder to ensure the normal compression process index. 4. Internal leakage is the main reason for the increase of exhaust temperature. 5.For multist
Dec 11, 2025
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top