The pressure relief of molecular sieve in the purification system is generally rapid in the early stage, not complete and running overtime in the late...
Before starting, the following preparations should be done first: 1) Check whether the unit has the starting conditions (including the reason of last ...
1. According to the specific situation of the construction, formulate the fire protection scheme, establish and improve the fire safety system, and st...
With the development trend of large-scale air separation plant, the column support of its matching cold box equipment tends to be large-scale. The tra...
When the general motor in the air separation plant is started, the current that the stator of the motor takes from the power grid is about 5 ~ of the ...
In order to check the installation quality, deformation under low temperature and smooth condition of pipelines, valves and field installed air separa...
Steam turbine is a kind of turbine mechanical equipment that converts heat energy of steam into mechanical energy. In air separation plant, steam turb...
There are many types and types of low temperature valves. Now taking the low temperature stop valve as an example, the common failures can be divided ...
The environmental conditions considered by the air separation plant include: altitude, atmospheric pressure, ambient temperature, air humidity, the co...
In order to realize the separation of oxygen and nitrogen in the air separation plant, the first thing is to make the air liquefaction, which must try...
With the development of social economy, the air separation plant becomes larger. The scale of air compressor, supercharger and other units of large ai...
Currently, there are three types of high-pressure aerators applied in the air separation plant: 1) Water Bath type. Put the coil into water with steam...
