There are mainly the following factors that affect the output of oxygen: 1) insufficient processing air volume. The reasons for the shortage of air vo...
The Feed gas and cold source of the crude argon tower come from the main tower and return to the main tower, so the crude argon Tower and the main tow...
The most likely leakage of switching heat exchanger is the welding line, especially the joint of the head and the pipeline. Most of the causes of leak...
The most common failure of the liquid oxygen pump is the leakage of the seal. For the structure of mechanical seal, the key is the bad contact of the ...
For the pipeline with pressure, the easiest problem in the production process is the leakage at the connection flange. Once leakage is found, do not t...
Switching purification process air separation equipment refers to self-cleaning of moisture and carbon dioxide in the passageway of switching Plate-fi...
As we know, in order to ensure self-cleaning of all low-voltage air separation plant, the temperature difference of cold end of switching heat exchang...
The air contains a small amount of water vapor, carbon dioxide, acetylene, hydrocarbon and a little dust and other impurities. It will be very dangero...
When the working condition of the air separation plant is stable, the cooling capacity of the unit keeps balance with the cooling capacity consumption...
The load adjustment range of low pressure air separation plant is related to the adjustment performance of raw material air compressor, the adjustment...
The process of extracting neon and helium from the air separation plant is divided into three steps: the first step is to produce crude neon and heliu...
Liquid air and liquid nitrogen supercooler uses nitrogen as cold source to cool liquid air or liquid nitrogen. There are Pipe type and plate type cool...
