The determination of the running cycle of the air separation plant is mainly based on the gradual accumulation of trace carbon dioxide after it is bro...
Air separation equipment piston type liquid oxygen pump is widely used in liquid gasification station. The following requirements should be paid atten...
Nitrogen is the main component of air in the universal pressure conversion and adsorption equipment. It is colorless, odorless, non-toxic and non-comb...
I. Preface With the rapid development of industry, nitrogen has been widely used in chemical engineering, electronics, metallurgy, food, machinery an...
During the process of storage and transportation, the liquid storage tank should pay attention to: 1) the protective equipment and instrument of the s...
The correct operation method of air compressor: Air compressor is one of the main mechanical power equipment of many enterprises, so it is very neces...
When the whole low pressure oxygen generator encounters emergency power failure, the first task is to open the air release valve at the end of the air...
No matter in the starting working condition or in the normal operating condition, medium-voltage small air separation plant must pay great attention t...
1) insufficient cooling water. The heat of the air is not enough to be taken away by the cooling water, resulting in the increase of the next level of...
1. What is reflux ratio? What influence does it have on rectification? Answer: reflux ratio refers to the ratio of the amount of liquid in the lower s...
I. The basic principle of membrane separation and oxygen generation the study of gas's mass transfer process in membrane has a history of more than 10...
1 The condensing evaporator connected with the upper and lower towers arranges multiple plate units in a single layer, or adds auxiliary condensing ev...
