当前位置: Home / Faq / Large air separation FAQ /

Selection of argon fraction extraction port on the upper tower of air separation equipment

Selection of argon fraction extraction port on the upper tower of air separation equipment
Jun 21, 2023
Author: DEAR AST

From the distribution of argon in the upper tower, it can be seen that part of the argon enrichment zone is in the distillation section and part is in the extraction section. The gas phase argon concentration in the rich argon region of the general distillation section is higher than that in the rich argon region of the distillation section, and the entire rich argon region of the distillation section contains three components: oxygen, nitrogen, and argon. However, the lower part of the rich argon region of the distillation section only contains two components: oxygen and argon. Therefore, the argon fraction extraction port should be located in the lower rich argon region.

Kaifeng DEAR Air Separation Industrial Co., Ltd. has signed a supply contract with Jiangsu Gaoyou Kangbo New Materials Co., Ltd. for a set of high-purity nitrogen air separation equipment for an annual production line of 10000 tons of high-purity polycrystalline silicon. The goal of this project is to use a high-purity nitrogen production system to produce nitrogen gas that meets the needs of high-purity polycrystalline silicon production

DEAR Air Separation Solve YourSelection of argon fraction extraction port on the upper tower of air separation equipmentYou can also learn about otherLarge air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
Another part of the nitrogen vaporized in the liquefier is heated up to a certain temperature in the high pressure heat exchanger and pumped out to the low pressure nitrogen press, the nitrogen separated by the gas-liquid separator is also heated up by the high pressure heat exchanger and then goes to the low pressure nitrogen press, compressed to a certain pressure by the low pressure nitrogen press and then back to the high pressure heat exchanger for heat exchange with liquid air separat...
2026.04.17
Special pressure-bearing equipment generally bears internal pressure, that will cause tensile stress inside the shell, which is called working stress. The working stress is directly proportional to the pressure and diameter, and inversely proportional to the vessel wall thickness. The axial stress is half of the circumferential stress. Therefore, for cylindrical vessels, the stress of longitudinal weld is twice that of girth weld. Because the geometric shape of the spherical shell is symmetrical to the spherical center, and the axial stress is equal to the circumferential stress in numerical value. Therefore, the wall thickness of the spherical vessel can be reduced by half as much as that of the cylindrical vessel under the same pressure and diameter.
2026.04.16
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top