当前位置: Home / Faq / Large air separation FAQ /

Superheated steam

Superheated steam
Jan 25, 2021
Author: DEAR AST

When heating the liquid in the constant pressure container, the temperature of the liquid is lower than the boiling point at the beginning, and it is all in the liquid state, which is called supercooled liquid. With the increase of temperature, when the evaporation temperature is reached, the liquid begins to evaporate, and the temperature does not change. At this time, the coexistence of vapor and liquid is in the saturated state. When the vapor is completely evaporated, the saturated steam continues to be heated, and the steam temperature begins to rise again. When exceeds the saturation temperature, it is called superheated steam.

DEAR Air Separation Solve YourSuperheated steamYou can also learn about otherLarge air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
The skid mounting of equipment refers to connecting the pipelines, equipment, pumps, control cabinets, electrical instruments and other components of the complete set into a whole according to the designed process flow, and fixing them on an integral base through welding, bolting and other connection methods. Without site installation, it can be directly completed the mechanical and electrical integration installation of the whole set in the plant area, then transporting and hoisting will be convenient.
2024.05.15
The working pressure of the high-pressure oxygen compressor used for filling bottles is high, and it is easy to cause cylinder burning accidents due to improper operation and management. In order to prevent this kind of accidents from happening, the following matters should be paid attention to when using and maintaining: 1) for the parts of the oxygen compressor, the maintenance tools and the hands of the maintenance personnel must be strictly skim and cleaned, finally, clean the carbon tetrachluene thoroughly. When pulling out the piston for overhaul, special attention should be paid to clear the oil stain at the bottom of the piston rod in case of stain the seal. When the sealer and scraper are worn out, they should be replaced in time to prevent them from being oiled; 2) the distilled water used for lubrication must not be interrupted. Distilled water tank should be more than 2m higher than cylinder head, and water level gauge and dripping device should be easy to monitor. The a...
2024.05.14
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top