The working pressure of the high-pressure oxygen compressor used for filling bottles is high, and it is easy to cause cylinder burning accidents due t...
For the pipeline with pressure, the easiest problem in the production process is the leakage at the connection flange. Once leakage is found, do not t...
As we know, in order to ensure self-cleaning of all low-voltage air separation plant, the temperature difference of cold end of switching heat exchang...
Reducing the high pressure of small air separation equipment with medium pressure expansion machine can reduce the energy consumption of air separatio...
The load adjustment range of low pressure air separation plant is related to the adjustment performance of raw material air compressor, the adjustment...
The spacing between the tower plates determines the height of the whole distillation column. Therefore, it is hoped that the spacing between the tower...
The pressure value measured by the pressure gauge reflects the pressure level, but it is not the actual pressure. According to the working principle o...
The air pressure test on site is mainly to check the air tightness of the air separation plant. The following problems should be paid attention to dur...
The main components in the air are nitrogen and oxygen. By selecting the adsorbents with different adsorption selectivity for nitrogen and oxygen, the...
With the increasingly wide application of cryogenic liquid, in order to reduce material cost, improve storage efficiency, reduce equipment floor area,...
In the internal compression process air separation plant, we generally select the the multistage centrifugal pump as the liquid nitrogen pump. In orde...
At the beginning of starting the full low pressure oxygen generator, all the air entering the equipment is inflated through the expander, while the to...
