Surge is a kind of vibration under abnormal working condition when the flow of turbine compressor (also called vane compressor) decreases to a certain...
When the piston air compressor is started, it is generally necessary to master the following key points:1) first start the circulating oil pump, and c...
During the operation of small air separation plant, after a certain period of time, oil-water separators at all levels of air compressor, oil-water se...
Before starting, slowly open the upper and lower valves of the liquid level and liquid oxygen level gauge, check the liquid oxygen level, and decide t...
When the air volume decreases, both the rising steam volume and the recirculation fluid volume in the tower decrease, but the recirculation ratio can ...
The following two situations are common in the water inflow of the cooler (or switching heat exchanger:1) The water level of the air cooling tower of ...
There are mainly the following factors that affect the output of oxygen:1) insufficient processing air volume. Reasons for insufficient air capacity:①...
When the general motor is started, the current that the stator of the motor takes from the power grid is about 5 ~ of the rated current of the motor ~...
1) The station can only be built after the review and approval of relevant departments according to the regulations on the safety management of chemic...
The three-point temperature of the low temperature of the air separation tower is: T3 temperature refers to the temperature before the high pressure a...
There are many types and types of low temperature valves. Now take the low temperature stop valve as an example. The common failures can be divided in...
Switching valve (forced Valve) is a pneumatic switching valve installed on the hot end of switching heat exchanger (or cooler. The switch of the switc...
