What is the purpose of pressure testing for the completion of the light tower in the air separation equipment?...
The ratio of the actual expansion refrigeration capacity of the expander to the theoretical isentropic expansion refrigeration capacity is the efficie...
Causes of molecular sieve into the water accident: when the air-cooled tower level is higher than 3500mm water exceeds the height of the air inlet tub...
What are the development stages of Chinese biogas industry...
(1) Can be based on the cold box outside the piping diagram provided by the equipment manufacturer and the relevant national standards and norms for i...
In order to reduce the air temperature in the low temperature air separation unit, various heat exchange equipment are needed for cold and heat exchan...
What are the driving modes of compressors in large air separation equipment?...
The water supply source of air cooling column in precooling system equipment is cooling water pump, and water cooling column is supplied by chilled wa...
How to judge whether the cooling capacity of the oxygen generator in the air separation equipment is sufficient?...
What parameters are required for designing, installing, and producing complete sets of air separation equipment?...
The purpose of the blowing is to clean out the residual slag, aluminium chips and other debris from the piping and vessels. the air source for blowi...
Due to improper adjustment of seal gas pressure during operation, liquid oxygen pump can not pump liquid or leak. From the quality point of view, ...