当前位置: Home / Faq / Small air separation FAQ /

Stroke of the piston compressor valve gate for small air separation unit

Stroke of the piston compressor valve gate for small air separation unit
Mar 07, 2022
Author: DEAR AST

The stroke of the valve plate of the piston compressor valve of the small air separation unit should be reasonably selected according to the speed and pressure of the compressor and should not be too large or too small. If the valve stroke is too large, the valve blade may not open fully and may also close with a hysteresis due to the inertia of the moving parts. At the same time, if the stroke is too large, it will increase the speed of the valve blade when opening and closing, and the impact on the restrictor and valve seat will increase. If the stroke of the valve blade is too small, it will increase the resistance loss, reduce the flow capacity and affect thesmall air separation unit productivity and efficiency of the compressor.

Dear Institute of Air Separation Design and Research has a number of patented technologies in the field of air separation energy saving. As an important user of industrial gases, oxygen, nitrogen and argon have become indispensable energy media in steel production, and the small air separation unit and large air separation unit are the "heart" of gas production.

山东临沂钢铁集团(三德)16000

 

DEAR Air Separation Solve YourStroke of the piston compressor valve gate for small air separation unitYou can also learn about otherSmall air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
The liquefaction of gases can be divided into forward and reverse cycles. The forward cycle process is the absorption of heat from the higher temperature external heat source and the release of heat to the lower temperature external heat source. The reverse cycle is when the mass draws heat from a lower temperature external heat source and releases it to a higher temperature external heat source. The forward cycle converts heat energy into mechanical energy and the reverse cycle converts mechani...
2025.09.26
Distillation is using the different boiling points of the two substances to condense the mixed steam and vaporize the mixed liquid repeatedly to achieve gas separation. For a mixed liquid composed of two substances with different boiling points, when the heat absorption part evaporates, the volatile components will evaporate more, while the mixed steam will give off heat and partially condense, the non volatile components will condense more. If the saturated steam with higher temperature is mixed with the saturated liquid with lower temperature, the steam will release heat and partially condense, and the liquid will absorb heat part of it evaporates. If after a round of partial evaporation and partial condensation, the steam and liquid with higher concentration will contact with the steam and liquid with different temperature respectively, and then partial condensation and partial evaporation will occur again. This process will be repeated for many times, and finally gas separation
2025.09.25
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top