Causes of molecular sieve into the water accident: when the air-cooled tower level is higher than 3500mm water exceeds the height of the air inlet tube, a large amount of water with the air into the molecular sieve adsorber; when the air-cooled tower resistance rises, higher than 7kPa, the air-cooled tower will form a liquid suspension, resulting in bottom water level fluctuations, air-cooled tower resistance fluctuations, water with the air into the molecular sieve adsorber; molecular sieve swi...
Temperature difference is the power of heat transfer. As long as there is temperature difference between two materials, they will carry out the heat or cold transfer spontaneously. The heat is always transferred from the fluid with higher temperature to the lower temperature fluid.
Although the heat transfer process of various heat exchangers is not identical, the heat transfer law is basically the same.
The following is an example of the most widely used dividing wall heat exchanger: heat is transferred from hot fluid to cold fluid through the wall and flows in the opposite direction. The whole heat transfer process is divided into three stages.
In the first stage, convection heat transfer: the heat flow body transmits heat to the wall surface. This process not only has heat transfer caused by the relative displacement of each part of the fluid, but also has heat conduction in the fluid, which is the comprehensive function of convection and heat conduction.
In the second