In the liquid air separation plant, the cooled refrigerant goes to the air machine through the refrigerant delivery pipeline, and the intercooler cool...
1, gas welding of purple copper plate: welding purple copper plate is most commonly used for butt joints, lap joints and ding joints are used as littl...
The required steam pressure, flow rate, etc. should meet the process design requirements when the molecular sieve is heated. The heating regeneration ...
This project we use nitrogen booster cycle in the design process of oxygen compression fast variable load process. The process in small air separation...
Factors affecting convective heat transfer coefficient of air separation equipment...
How to arrange the high-pressure steam main of the small air separation unit? Small air separation unit for turbine high-pressure steam piping materi...
What is the function of the condenser evaporator in the fractionation tower of the air separation equipment?...
How to determine if the speed of the expansion machine in the air separation equipment is normal?...
What are the effects of the oil temperature of the expander during daily inspections of air separation equipment? How to control maintenance and opera...
Causes of molecular sieve into the water accident: when the air-cooled tower level is higher than 3500mm water exceeds the height of the air inlet tub...
Temperature difference is the power of heat transfer. As long as there is temperature difference between two materials, they will carry out the heat o...
What are the core objectives, key parameters, and targets of load regulation for air separation equipment?...
