The main components in the air are nitrogen and oxygen. By selecting the adsorbents with different adsorption selectivity for nitrogen and oxygen, the...
Carbon molecular sieve (CMS) is a new type of non-polar adsorbents, which has the performance of absorbing oxygen molecules in the air under normal te...
At the beginning of starting the full low pressure oxygen generator, all the air entering the equipment is inflated through the expander, while the to...
Liquid appears too early in the liquid purifier, which means that the liquid purifier is connected too early. If the temperature condition of the swit...
The actual running current of 132kw-8 electric motor is 220A ~ 240A, four air compressors share one air storage tank, and the actual pressure required...
Vacuum pump is a device that produces, improves and maintains vacuum in a certain enclosed space by various methods. Vacuum pump can be defined as a d...
In the whole low-pressure air separation process, some are equipped with a liquid purifier, and some are equipped with two or even three liquidators, ...
Booster turbine expansion machine, the working medium of this unit is pressurized by the booster first, and then enters into the main heat exchanger a...
The analysis of the working principle of centrifugal compressor I. The explanation of common nouns: (1) level: each level of impeller and its matched ...
The design of the internal structure of the adsorber: the design of the internal structure of the adsorber includes the determination of the bed layer...
Blowing off is the operation of removing solid impurities and free water by the impact of airflow, and at the same time, it can also expel part of the...
The determination of the running cycle of the air separation plant is mainly based on the gradual accumulation of trace carbon dioxide after it is bro...
