The comprehensive energy-saving transformation of cryogenic air separation is not a single point of equipment replacement, but a collaborative optimization of the whole system, which mainly covers six technical sectors:
1. optimization of compressed air supply system: frequency conversion/permanent magnet transformation of air compressor, matching of air supply pressure, reducing the loss of venting and depressurization, solving the problem of "big horse pulling small car", and the compression link accounts for more than 70% of the total energy consumption of air separation, which is the focus of energy conservation;
2. transformation of precooling and purification system: high efficiency and low resistance molecular sieve, adaptive regeneration control, air inlet precooling, reduce regeneration energy consumption and system resistance, and reduce compressor load;
3. upgrading of rectification and main heat exchange system: efficient and regular packing, optimization of reflux ratio, optimization of main heat exchanger with small temperature difference, optimization of internal compression process, improvement of oxygen, nitrogen and argon extraction rate and reduction of cold consumption per unit product;
4. optimization of expander cooling system: check expander efficiency, match working conditions, and improve refrigeration efficiency;
5. waste heat and pressure recovery and utilization: compression heat recovery, waste nitrogen waste heat utilization, etc;
6. intelligent automatic control optimization: APC advanced control and load linkage regulation.
7. to integrate and coordinate the above technologies and enlarge the energy-saving effect, an integrated intelligent platform is needed.
>>The intelligent energy efficiency management and control platform of DEAR air separation blue bank digital air separation can be connected to air compressor, purification system, cold box, expander, liquefaction condition, pipe network pressure, terminal gas load in a unified way, and the whole process linkage can be optimized automatically to produce gas and pressure on demand. It is suitable for less modification of old devices, non-stop production and upgrading, reduce manual intervention, and avoid energy consumption waste under low load conditions. It is an integrated scheme for the integration of complete set of transformation technologies.