The expander is the core refrigeration component of the air separation unit, and its inlet air temperature is the key parameter affecting the refrigeration capacity and operation stability of the unit. Under the condition that the conventional operating pressure and flow of the equipment are unchanged, the inlet air temperature and refrigeration capacity are positively correlated.
When the inlet temperature of the expander increases, the enthalpy of the inlet air increases significantly, the enthalpy drop of the adiabatic expansion of the gas in the expander increases, the external work capacity increases, and the unit cooling capacity of the equipment increases. Appropriately increasing the inlet air temperature can effectively make up for the cooling loss of the air separation unit, improve the refrigeration efficiency of the whole unit, and adapt to the high load production conditions. However, too high inlet air temperature will cause the outlet temperature of the expander to exceed the standard, which is easy to cause equipment frosting and icing, damage the impeller, bearings and other core components, and damage the cold and heat balance of the air separation system.
When the inlet air temperature of the expander decreases, the air enthalpy decreases, the expansion enthalpy decreases, the work done by the expander decreases, and the overall cooling capacity decreases. If the temperature is too low, it will lead to insufficient refrigeration capacity of the system, which can not offset the cold losses such as equipment running cold and heat exchange temperature difference, resulting in the decrease of main cooling liquid level and fluctuation of distillation conditions, affecting the output and purity of oxygen and nitrogen products.
To sum up, during the operation of the air separation plant, it is necessary to accurately control the inlet air temperature of the expander and maintain a reasonable range, which can not only ensure sufficient cooling capacity and stabilize the distillation condition, but also avoid low temperature failure and equipment loss, so as to ensure the efficient, safe and stable operation of the unit.