当前位置: Home / Faq / Small air separation FAQ /

What are the configuration options of high purity nitrogen in small air separation units??

What are the configuration options of high purity nitrogen in small air separation units??
Nov 05, 2024
Author: DEAR AST

The configuration of the high purity nitrogen small air separation unit has the following aspects:

1、 Compressor unit configuration, for the reflux nitrogen plant, the compressor discharge pressure is generally 5-10bar. When the unit is large in scale and the product pressure is high, the product nitrogen compressor can be set separately; For the positive flow expansion nitrogen plant, when the scale is large, when there are many liquid products, a supercharger can be set separately to increase the nitrogen production and liquid products to meet the product requirements.

2、 Precooling system, raw air volume is 30000nm ³/ Air conditioning unit below h, with air volume of 30000nm ³/ H (i.e. 10000nm ³/ The nitrogen water precooling system is used for the above mentioned equipment.

3、 Expander, expansion capacity is more than 3000Nm ³/ h. It can be equipped with booster end, and the product nitrogen or feed gas can be pressurized at the supercharging end, with expansion less than 3000Nm ³/ h. Then the fan is used for braking without booster end.

4、 Fractionator, nitrogen production less than 20000nm ³/ For H unit, distillation is directly used in single tower, when the unit size is greater than 20000nm ³/ When h, it is necessary to consider the use of double tower distillation unit for investment recovery comparison; For distillation tower, the lower the working pressure, the higher the distillation efficiency, but the diameter of the tower will increase.

At present, the gas separation industry is developing towards high purity, refinement, cutting-edge, etc. with the progress of science and technology and the improvement of national production level, more and more demand for ultra-high purity oxygen, ultra-high purity nitrogen and high purity rare gas is increasing, and the specification requirements are also higher and higher.

DEAR Air Separation is suitable for the market. Inorder to improve and develop, bold R & D and scientific and technological innovation can not only meet the needs of users' products, but also improve the comprehensive competitive power of gas separation industry.

mmexport1451559051175

DEAR Air Separation Solve YourWhat are the configuration options of high purity nitrogen in small air separation units??You can also learn about otherSmall air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
In the air separation unit, low-temperature liquid is transported by centrifugal cryogenic pump. In order to ensure the reliable operation of the equipment, two sets of low-temperature pumps are generally equipped, one for use and one for standby. During normal operation, the main pump runs at full load, and the standby pump is in standby state under low load operation. Since the working medium temperature of cryogenic liquid pump is about -180°C, the working pressure is very high, and the pump body is installed in the cold box. When the pump fails, it is extremely difficult to maintain. Therefore, how to maintain the stable and reliable operation of cryogenic liquid pump is of great significance.
2025.09.03
The brief introduction of the air filter and air compressor in this process is the same as that of the chilled nitrogen production process. 1. Cold dryer: it is an air separation equipment used to reduce the temperature of compressed air before entering the air drying purifier to extract oil and water. It usually adopts post cooler with the structure of column pipe type, casing type, cooling sheet type and so on. 2. Oil-water separator: its function is to separate the oil and moisture contained in the compressed air and make the compressed air get Primary purification. 3. Air drying purifier: Compressed air still contains certain moisture after passing through the post cooler, and its content depends on the temperature of the air. The drying process of compressed air generally adopts molecular sieve absorption method and freeze drying method. 4. Pressure conversion absorption nitrogen generation device: the adsorbents used are usually 5A Molecular sieve or carbon molecular sieve, an...
2025.09.02
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top