When the air separation Tower turns from normal temperature to low temperature, the phenomena such as pipe crack and valve jam often appear. The main ...
Air separation tower has the following requirements for Foundation:1) to ensure the level of the distillation column plate, the uneven settlement of t...
When the gas is used for external work through the expansion of the expander, the brake must consume this part of work. Otherwise, the rotating speed ...
Ring flow is determined by the heat balance of switching heat exchanger (or cooler) according to the requirement of air separation process. Under the ...
The expander is the machine for gas expansion to work externally, and the original process is mostly to use the expander to drive the motor and output...
There are many factors affecting the displacement of piston compressor, which can be summarized as follows:1) the reduction of the rotation speed of t...
Open the air inlet cam of the expansion machine to lengthen the opening time of the air inlet valve and increase the air inlet, that is, increase the ...
If the air inlet valve is open and closed normally, but the exhaust valve stem is not open when it should be opened, then the air in the cylinder cann...
The temperature condition adjustment of the cooler (or switching heat exchanger) is based on the central temperature. The "middle" mentioned here does...
In the temperature of the forward air into the cooler (hot end temperature, related to the cooling effect of the last cooler of the air compressor or ...
With the arrival of a batch of new modern production equipment, the production capacity of our company's new factory area has been further improve...
