Saturation temperature and saturation pressure are terms in gas-liquid equilibrium. If it is not filled with liquid in a sealed container, part of liq...
The load adjustment range of low pressure air separation plant is related to the adjustment performance of raw material air compressor, the adjustment...
Besides reducing air loss as much as possible, reducing equipment resistance to increase air volume and reducing loss of running cooling, incomplete l...
There are mainly the following factors that affect the output of oxygen:1) insufficient processing air volume. Reasons for insufficient air capacity:①...
Before starting, the following preparations should be made:1) Check whether the unit has the starting condition (including the reason of last stop and...
Air compressor intermediate cooler is generally shell-tube structure. Water is supplied inside the pipe, and gas is supplied between the pipes, which ...
The liquid in the lower tower mainly comes from the liquid flowing from the first tower plate at the bottom. The liquid flowing down from the top Towe...
The adsorption capacity of the adsorbents is expressed by static adsorption capacity and dynamic adsorption capacity. The static adsorption capacity i...
The Feed gas and cold source of the crude argon tower come from the main tower and return to the main tower, so the crude argon Tower and the main tow...
When the general motor is started, the current that the stator of the motor takes from the power grid is about 5 ~ of the rated current of the motor ~...
When the power supply of the air separation plant of the molecular sieve adsorption purification process is restored after the power failure, the oper...
Almost all motors commonly used in the air separation plant are three-phase AC motors. Three-phase AC motor can be divided into asynchronous motor and...
