Ltd
News of Ltd
More
Sep 30, 2020
On September 24, a delegation from QinZhou Federation of Industry and Commerce of Guangxi province came to DEAR air separation for investigation and i
Aug 28, 2020
On August 27, Kaifeng DEAR air separation Industrial Co., Ltd. (hereinafter referred to as Kaifeng DEAR air separation) and Kaifeng Mobile jointly hel
Solutions of Ltd
More
Small air separation plant KDON-10000/10000 solution for metallurgical industry
The metallurgical industry has its unique industry characteristics and high requirements for oxygen purity. DEAR air separation has cooperated with domestic and foreign metallurgical industry customers in many projects, has rich project experience, and has continuously invested funds to develop energy-saving and intelligent air separation plant. KDON-10000/10000 is highly praised by customers for its high efficiency and stable operation.
Large air separation plant KDON (Ar)-12000/24000-400 solution for metallurgical industry
Metallurgical industry is an industry to develop metal mineral resources and produce various kinds of raw materials for metal products. With the progress of science and technology, the metallurgical industry has new requirements for the process, process, management and application research and development of air separation plant. For many years, DEAR air separation has provided a number of complete solutions for the metallurgical industry, relying on the deep understanding of the industry and excellent product quality to help the efficient development of the metallurgical industry. KDON (Ar) - 12000 / 24000-400, a large scale air separation plant cooperated by DEAR air separation company and customers, has realized the rapid, stable and efficient operation of the production process, which is highly affirmed by customers. It also provides strong technical and product support for customers to cope with the fierce market competition.
Faq of Ltd
More
The brief introduction of the air filter and air compressor in this process is the same as that of the chilled nitrogen production process. 1. Cold dryer: it is an air separation equipment used to reduce the temperature of compressed air before entering the air drying purifier to extract oil and water. It usually adopts post cooler with the structure of column pipe type, casing type, cooling sheet type and so on. 2. Oil-water separator: its function is to separate the oil and moisture contained in the compressed air and make the compressed air get Primary purification. 3. Air drying purifier: Compressed air still contains certain moisture after passing through the post cooler, and its content depends on the temperature of the air. The drying process of compressed air generally adopts molecular sieve absorption method and freeze drying method. 4. Pressure conversion absorption nitrogen generation device: the adsorbents used are usually 5A Molecular sieve or carbon molecular sieve, an...
Sep 02, 2025
There must be enough smooth straight pipe sections before and after the flow orifice plate. The distance is 10 times of pipe diameter in front of the orifice plate and 5 times of the pipe diameter behind the orifice plate, and no factors affecting the measurement accuracy (such as pipe joint, etc.) are allowed. The inner surface of the pipe weld should also be ground smooth, and the gasket should not extend into the inner diameter of the pipe. And carefully check the installation direction of the orifice plate, do not install it in reverse. (judgment method: the small exit is the entrance, and the large exit is the outlet)
Jun 10, 2025
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top