Home / All Air Separation tags / Installation of air separation pre-cooling systems /

Installation of air separation pre-cooling systems faq

First of all, it completely conforms to the general principle of distillation organization and simplifies the organization of air separation distillat...

2021.12.02

Oxygen generators are switchable heat exchanger process oxygen generators and molecular sieve pressurised expansion process oxygen generators. The pu...

2021.12.01

The volume fraction of carbon dioxide in air is generally around 0.03%, if the air compressor compresses the air to 0.62 MPa, the partial pressure of ...

2021.12.01

The process of stripping is a process of continuous exchange between the high boiling point components in the rising gas and the low boiling point com...

2021.11.30

  In the small air separation unit, when gas or liquid flows through a shrinkage hole or valve in the pipeline, the flow will be hindered, and the fl...

2021.11.30

In fact, reflux ratio is a conventional saying. In practical calculation, it is divided into liquid gas ratio in distillation section and gas-liquid r...

2021.11.29

If the air temperature in the small air separation unit expander is lower than the liquefaction temperature corresponding to the local pressure, part ...

2021.11.29

Air cooling column start-up process...

2021.11.16

Advantages of structured packing column ...

2021.11.16

Minimum reflux ration and maximum reflux ration...

2021.11.15

Features of double column process...

2021.11.12

What are the settings of air separation unit pre-cooling system?...

2021.11.10
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top