Why can't the DEAR Biogas purification unit argon fraction extraction port be located at the site with the highest hydrogen content?...
What are the advantages of the DEAR Biogas purification unit main heat exchanger (non-switching plate and fin heat exchanger) compared to a switching ...
The process of stripping is a process of continuous exchange between the high boiling point components in the rising gas and the low boiling point com...
In the small air separation unit, when gas or liquid flows through a shrinkage hole or valve in the pipeline, the flow will be hindered, and the fl...
In fact, reflux ratio is a conventional saying. In practical calculation, it is divided into liquid gas ratio in distillation section and gas-liquid r...
If the air temperature in the small air separation unit expander is lower than the liquefaction temperature corresponding to the local pressure, part ...
Air separation unit not only has the distillation and separation process of air under the condition of deep cooling, but also the process of keeping t...
The classical single column process is the first one to be used in industrial application. However, there are many disadvantages in the classical sing...
After the gas flows out of the expander impeller, there is still a certain speed. This part of mechanical energy without work is called residual sp...
What types of air cooling towers are available for DEAR Biogas purification units?...
Does the air in DEAR air separation equipment partially liquefy before or after throttling in medium pressure processes?...
What is the minimum work in the separation process of DEAR air separation equipment and how can I save energy in the distillation and separation proce...
