The high pressure air inlet valve controls the air volume entering each compartment of the main heat exchanger respectively to adjust the temperature ...
When using electrical equipment, the main danger is the occurrence of electric shock and electric injury. The so-called electric shock means that when...
When the piston compressor is running and starting, when the piston reaches the inner and outer (or up and down) stop point, it will directly or indir...
Enthusiasm is a kind of concentration formed by a person's great interest and interest in something. Enthusiasm is the key for us to do any work w...
At the beginning of starting the full low pressure oxygen generator, all the air entering the equipment is inflated through the expander, while the to...
Liquid appears too early in the liquid purifier, which means that the liquid purifier is connected too early. If the temperature condition of the swit...
In the process of production, indicators such as the purity of oxygen products is not less than 99.5%, the purity of nitrogen is not less than 99.99%,...
The liquid nitrogen supercooler uses the low temperature gas nitrogen from the upper tower to cool the liquid nitrogen from the lower tower, so as to ...
The liquefaction temperature of gas is not only related to the type of gas, but also to the level of pressure. The higher the pressure is. The closer ...
Liquid oxygen self-cyclic adsorption can be divided into three types according to different heat sources of thermal siphon evaporator:1) use the gas a...
Molecular sieve purifier in 0.5 ~ Regeneration should be carried out when the adsorption reaches saturation under 0.6MPa. Regeneration operation is di...
In order to accumulate the liquid as soon as possible after the appearance of the liquid, we should prepare as much cold as possible and reduce the co...
