Besides reducing air loss as much as possible, reducing equipment resistance to increase air volume and reducing loss of running cooling, incomplete l...
There are mainly the following factors that affect the output of oxygen:1) insufficient processing air volume. Reasons for insufficient air capacity:①...
Air compressor intermediate cooler is generally shell-tube structure. Water is supplied inside the pipe, and gas is supplied between the pipes, which ...
When the general motor is started, the current that the stator of the motor takes from the power grid is about 5 ~ of the rated current of the motor ~...
Currently, there are three types of high-pressure aerators applied in air separation plant in filling bottles:1) Water Bath type. Put the coil into wa...
The three-point temperature of the low temperature of the air separation tower is: T3 temperature refers to the temperature before the high pressure a...
Municipal Party Secretary Qi Jinli (second from left), Mayor Ji Bingwei (first from right), chairman he Baotang (second from right), vice general m...
Answer: in the whole low-pressure air separation process, some are equipped with a liquid purifier, and some are equipped with two or even three liqui...
Leakage is the easiest failure of regulating valve during operation. Some leak at the welding place, and some leak at the sealing place of the stuffin...
Why should the switching cycle be shortened during the start-up phase of the full low pressure air separation plant with self-oil removal process?Answ...
The most common failure of the liquid oxygen pump is the leakage of the seal. For the structure of mechanical seal, the key is the bad contact of the ...
The unit power consumption of oxygen production W02 (kW • h/m3) is one of the important economic indicators of oxygen production. In power consum...
