The impeller on the main axis of centrifugal compressor and other parts and parts rotate at high speed along with the coaxial, which is collectively r...
Centrifugal compressor produces axial displacement, firstly because of the existence of axial force. The generation process of axial force is as follo...
Hebei Qinhuangdao Anfeng Iron and Steel Group KDON-15000/35000 type complete air separation Project (Phase IV) type air separation equipment. Process ...
The unit power consumption of the air separation plant is proportional to the unit power consumption of the air compressor (the power consumption of c...
The components of piston air compressor which need water cooling include air cylinder, intermediate cooler, Post cooler and lubricating oil cooler, et...
Liquid appears too early in the liquid purifier, which means that the liquid purifier is connected too early. If the temperature condition of the swit...
When the air separation plant stops, the liquid on the air separation tower will flow into the condensing evaporator to raise the liquid oxygen level....
The purification process of the molecular sieve is that before the compressed air enters into the cold box, it should first go through the molecular s...
All instrument pipelines and pipe fittings used for oxygen passage should be strictly degreased with carbon tetrachate or alcohol before installation....
The liquid nitrogen supercooler uses the low temperature gas nitrogen from the upper tower to cool the liquid nitrogen from the lower tower, so as to ...
In addition to certain requirements on the purity of medical oxygen (the purity of oxygen is 99.5% for the cooling method), it is also required that ...
The applicable range of the working temperature of the molecular sieve is generally 8 ~ 15℃, within this range can work normally, once beyond this ran...
