DEAR News - DEAR Air Separation

Revitalize Idle Assets to Attract Investment, Foster Synergistic Development for New Energy—The Inspection Team Visits DEAR Air Separation for Inspection and Negotiation, Laying the Foundation for Pre

2026.03.27

DEAR Video

New batch of DEAR Air Separation is delivered as a whole

DEAR Air Separation's heart and romance

Why should the temperature condition of the cooler (or switching heat exchanger) be adjusted according to the middle temperature?

The temperature condition adjustment of the cooler (or switching heat exchanger) is based on the central temperature. The "middle" mentioned here does

Mar 21, 2013

What is the relationship between the temperature difference between the hot end and the temperature difference between the cold end of the cooler (or the switching heat exchanger?

In the temperature of the forward air into the cooler (hot end temperature, related to the cooling effect of the last cooler of the air compressor or

Mar 21, 2013

Establish and perfect the new factory system -- focus on management to promote production

With the arrival of a batch of new modern production equipment, the production capacity of our company's new factory area has been further improve

Mar 21, 2013

How to deal with the water inflow accident of the cooler (or switching heat exchanger?

The following two situations are common in the water inflow of the cooler (or switching heat exchanger:1) The water level of the air cooling tower of

Mar 20, 2013

How to judge the main condenser evaporator leakage?

Answer: when the main cooling is seriously leaked, nitrogen with higher pressure will leak into the low pressure oxygen side in large quantities, then

Mar 20, 2013

Safety knowledge of construction site

At the site of equipment installation, we may see a variety of operation methods. When we first met, we may be a little surprised. We may get used to

Mar 20, 2013

Details determine success or failure.

"One Tree and one Bodhi, one sand and one world ". Everything in life is originally composed of details, and details are often the easiest t

Mar 20, 2013

Why doesn't the full low pressure oxygen generator enter air when it starts?

At the beginning of starting the full low pressure oxygen generator, all the air entering the equipment is inflated through the expander, while the to

Mar 18, 2013

When the full low pressure oxygen generator begins to accumulate liquid oxygen, is it necessary to keep the liquid level? Why?

The start-up phase of the whole low-pressure oxygen generator is that liquid empty appears first in the lower tower, and then liquid oxygen appears in

Mar 18, 2013

What's the disadvantage of liquid appearing too early in the liquid purifier, and how to prevent it?

Liquid appears too early in the liquid purifier, which means that the liquid purifier is connected too early. If the temperature condition of the swit

Mar 18, 2013

Why can small air separation plant lower the forward air temperature of the expansion machine instead reduce the high pressure?

Reducing the high pressure of small air separation equipment with medium pressure expansion machine can reduce the energy consumption of air separatio

Mar 18, 2013

What conditions limit the inflated air volume entering the tower?

The expansion air volume entering the upper tower increases, and the reflux ratio of the distillation section decreases correspondingly. In order to a

Mar 15, 2013

1...52 53 54 55 56 57 58 59...109

Need more information?

Name ^*

Country

Email^*

Tel

Products

Large air separation
Small air separation
High purity nitrogen air separation
Liquefaction air separation
Complete air separation
Biogas purification
Air separation parts

service@dearast.com Chat online

Tel：+86-19837850537