当前位置: Home / Faq / Large air separation FAQ /

Which seamless steel pipes are suitable for large air separation units?

Which seamless steel pipes are suitable for large air separation units?
Jun 02, 2022
Author: DEAR AST

Seamless steel pipes, the largest amount of industrial pipelines, the largest variety of specifications of the pipe.
The seamless steel tubes for air separation equipment are carbon seamless steel tubes and high pressure seamless steel tubes.
Carbon seamless steel pipe, commonly used manufacturing materials for 10, 20, 16Mn steel.
Its specifications range from: hot-rolled outer diameter φ32 to 630mm, cold-drawn outer diameter φ6 to 200mm, single tube length 4 to 12m, allowable operating temperature of -40 to 450°C. It is widely used for transporting various media that are not corrosive to steel, such as transporting steam, oxygen, compressed air, oil and oil and gas, etc.
High-pressure seamless steel tubes are made of the same materials as the above seamless steel tubes, except that the wall is thicker than that of low-pressure seamless steel tubes, with the thickest wall reaching 40 mm. such as high-pressure seamless steel tubes for fertilizer equipment with specifications of φ14×4(mm)~273×40(mm), single tube length 4-12 m, applicable pressure range 10-32 MPa, operating temperature -40~400℃. High pressure seamless steel pipes are used in petrochemical plants to transport raw material gas, hydrogen and nitrogen, synthesis gas, water vapour, high pressure condensate and other media.
DEAR Air produces and designs oxygen pipelines and welds various steel pipes to ensure the safe and stable operation of small air separation unit, large air separation units and liquid air separation plants and installations.

DEAR Air Separation Solve YourWhich seamless steel pipes are suitable for large air separation units?You can also learn about otherLarge air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
In case of sudden power failure during the operation of small air separation unit, the following steps should be followed:   First, open the vent valve (anti surge valve) of air compressor to prevent the air compressor from surging and causing the air compressor to reverse due to air backflow;   Then check whether the molecular sieve adsorber switch should be interlocked to close, if not, it should be man...
2024.11.21
How is the ratio of individual gases adjusted in an air separation plant?
2024.11.20
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top