Secondary stresses are stresses that arise due to the constraint received by the deformation of the pipe and are not directly balanced with external f
Plate and fin heat exchanger logistics distribution characteristics of the factors of transformation there are many, the heat exchanger usually have a
Meet the equilibrium relationship of the applied load, with the applied load increases, and no self-limiting, when its value exceeds the yield limit o
Crude argon tower working condition stability mainly hand argon fraction composition, crude argon condenser evaporation volume, crude argon liquid del
The design of the piping in the cold box of the air separation plant is complex and complicated, each line has its own process requirements and the de
To ensure the stability of the working conditions to ensure that the extraction rate of argon can be improved, in fact, to ensure the stability of arg
Primary stresses are those resulting from the action of an applied load, such as pressure or gravity. The arrangement of pipes and the setting of supp
Air separation cryogenic special day storage tank is generally heavier in weight, large outer diameter, higher total height and other characteristics,
The piping specialist submits a piping stress analysis calculation to confirm the equipment forces, submits the load data to the structural specialist
Air separation equipment temperature below -20 degrees, resulting in poor operating conditions, steel in low temperature conditions, will gradually ch
Includes a stress check of the content of the restraint points including fixed points, support points, limit guide points and displacement points cold
Oxygen-rich combustion effectively reduces the air excess coefficient, so that the exhaust heat loss is significantly reduced, improving the efficienc
