Home / All Air Separation tags /

Pressure swing adsorption

Pressure swing adsorption
The advantages of pressure swing adsorption (PSA) are as follows: (1) high purity of products; (2) generally, it can work at room temperature and low pressure, which is energy-saving and economical; (3) simple equipment, convenient operation and maintenance; (4) automation can be achieved by contacting circulation operation.
Solutions of Pressure swing adsorption
More
Large air separation plant KDON-15000/35000 solution for metallurgical industry
DEAR air separation has cooperated with customers in metallurgical industry domestic and abroad in many projects, and has rich project experience. DEAR has continuously invested in the research and development of large-scale air separation plant. In view of different fields, DEAR combined with the characteristics of these industry, develops high-efficiency energy-saving air separation plant. DEAR air separation uses the rapid development of internet technology to establish a remote monitoring system to collect real-time operation data of each air separation plant, and provides the best suggestions for users by using big data analysis. The KDON-15000 / 35000 large scale air separation plant, cooperated with customers, has achieved rapid, stable and efficient operation, and highly affirmed by customer.
Small air separation plant KDON(Ar)-8000/16000-220 solution for metallurgical industry
DEAR air separation has provided a number of complete solutions for the metallurgical industry for many years, accumulated rich experience, and helped the efficient development of the metallurgical industry. With many years of service experience in the metallurgical industry, DEAR air separation provides customer with the small air separation plant KDON (Ar) - 8000 / 16000 / 220, which is mature technological, operating reliable, operating convenient, and energy saving intelligent, that is highly recognized by customers.
Faq of Pressure swing adsorption
More
Leakage is the easiest failure of regulating valve during operation. Some leak at the welding place, and some leak at the sealing place of the stuffing. When leakage occurs at the welding site, repair welding can be done during overhaul; when leakage occurs at the sealing site of the stuffing, new stuffing can be replaced. Sometimes the film of the film actuator is damaged, and the valve stem can't act normally with the air pressure signal, so it needs to be replaced with a new film. In order to avoid the deformation of the valve stem affecting the regulating function, it is better to stand on the pipeline when installing the regulating valve. It is not suitable to install the low-temperature film regulating valve horizontally, and it should form an angle above 150 with the level so that the sealing place of the stuffing is not affected by the liquid. The slanting valve must be lifted. When operating, always pay attention to whether the regulating valve gets stuck. The sealing fille...
Apr 17, 2024
to increase oxygen extraction rate.The advantages and disadvantages of nitrogen expansion are:1) The gas does not enter the upper column after nitrogen expansion, so it will not directly affect the distillation conditions of the upper column. Its superheat degree after expansion can be higher than that of air expansion, and the pressure after expansion can also be lower than that of air expansion. Therefore, the unit cooling capacity is greater than that of air expansion. Under certain condition...
Jan 05, 2024
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top