Pressure pipe support hanger strength in large air separation unit
Pressure pipe support hanger strength in large air separation unit
Inspection often found support hanger bending deformation or even off, some are design problems, the pipe is too far from the cold box wall, the support is too long strength is relatively poor.
Products of Pressure pipe support hanger strength in large air separation unit
According to the influence and reform of the general environment of the non-ferrous industry, the problems faced by this industry are becoming more and more serious, and the control of production capacity is particularly important. Recently, the 4500/4500 type small air separation equipment project signed with customers by DEAR Air Separation, through the trial run stage, all the technical indicators have reached or exceeded the design standard, and have been continuously sending nitrogen for several days, which has been well received by users.
The main applications of the air separation plant in petroleum industry include the use of natural gas or heavy oil to produce synthetic ammonia, olefin and petrochemical products, as well as providing nitrogen for oil extraction. The implementation of 1500 small air separation plant project cooperated with clients by DEAR air separation plant is beneficial to the improvement of crude oil processing scale in Shengli oilfiel
Pipe of small air separation unit before installation, check the orientation of the container orifice, the orientation of the valve inlet and outlet is correct. The pipe fittings should be thoroughly cleaned ten net and strictly degreased, while opening the welding bevels etc. The welded pipe must be brushed with clean stainless steel wire for a very short time before welding.
In order to reduce the cold box pipe welding mouth, can be prefabricated in a clean plant, and later for the final dist...
Liquid air separation plant piston compressor clearance volume is: the compressor at the end of the exhaust, the piston and the cylinder end of the wall between the residual part of the high pressure gas occupied by the cylinder volume. The existence of the residual volume directly reduces the exhaust volume of the compressor, at the same time, the suction of this part of the high pressure gas expansion, will also cause a delay in the suction process, the reduction in suction volume, ultimately ...