The pretension of a guide flap under the inlet pipe of the head allows the fluid to be divided into 3 parts to enter the closure, allowing a smaller cost of resistance to the distribution of the flow
Products of Head construction for small air separation units
The main applications of the air separation plant in petroleum industry include the use of natural gas or heavy oil to produce synthetic ammonia, olefin and petrochemical products, as well as providing nitrogen for oil extraction. The implementation of 1500 small air separation plant project cooperated with clients by DEAR air separation plant is beneficial to the improvement of crude oil processing scale in Shengli oilfiel
The industrial gases used in petrochemical industry include oxygen and nitrogen. The main applications include the use of natural gas or heavy oil to produce synthetic ammonia, olefin and petrochemical products, and providing nitrogen for oil extraction. Based on the principle of mutual benefit and win-win cooperation, DEAR Air Separation plant and the client jointly signed the small air separation plant 2000 project again
When the main condenser evaporator leaks seriously, a large amount of high-pressure nitrogen will leak to the low-pressure oxygen side, and the pressure of the upper and lower columns and the purity of the product will change significantly until normal production cannot be maintained.
When the main condenser evaporator leaks slightly, the pressure of the upper and lower columns will not change significantly, and the purity of liquid oxygen in the main condenser evaporator will not decrease significantly. The common phenomenon is that the purity of the gas and liquid oxygen in the main condensing evaporator is very different, and the gas concentration is lower than that in equilibrium with liquid oxygen. For example, the concentration of liquid oxygen is 99% and that of gaseous oxygen is 96%, that 7 main cooling pipes were found to be leaking during maintenance.
The common causes of leakage are as follows:
1. Pipes are worn due to mutual vibration. For long tube condensing evap