Economic benefits of biogas purification

A low pressure nitrogen expander is added to the process design. The pressure nitrogen from the pressure tower and high pressure expander is expanded into low pressure nitrogen, which is combined with the nitrogen coming from the low pressure tower and fed into the charge gas compressor. This is specially set up for rapid oxygen load changes. The oxygen product flow rate during normal operation corresponds to the amount of oxygen contained in the amount of air entering the air separation unit. T...

Shell and tube air separation heat exchanger is the most representative wall heat exchanger. It has a long history of application and is still dominant in all heat exchangers. Shell and tube heat exchanger is mainly composed of shell, tube bundle, tube sheet and head. Most of the shell is round, and there are parallel tube bundles inside. Both ends of the tube bundle are fixed on the tube plate. In shell and tube heat exchanger, there are two kinds of fluids for heat exchange. One kind of fluid flows in the tube, and its stroke is called tube side. The other flows outside the tube and its stroke is called shell side. The wall of tube bundle is the heat transfer surface. In order to improve the heat transfer coefficient of the fluid outside the tube, a certain number of transverse baffles are usually installed in the shell. The baffle can not only prevent the short circuit of the fluid and increase the velocity of the fluid, but also force the fluid to flow through the tube bundle man