Liquefied air when China was in a factory in Shandong province, the factory reported that for a long time, the 21000Nm 3/h air separation plant and th...
Blowing off is the operation of removing solid impurities and free water by the impact of airflow, and at the same time, it can also expel part of the...
Argon fraction is separated from oxygen and argon in the crude argon tower. Argon fraction enters from the bottom, and the top gets crude argon contai...
The tower plate resistance refers to the pressure drop generated when the rising steam passes through the sieve hole of the tower plate and the liquid...
The pressure change of the lower tower is related to the following factors:1) if the air and liquid nitrogen throttle are opened too big, the pressure...
Air separation tower has the following requirements for Foundation:1) to ensure the level of the distillation column plate, the uneven settlement of t...
In the main tower of the air separation Tower, the distribution of argon varies with the position of the liquid inlet. The position of the liquid inle...
If the automatic adjustment system of the liquid level of the air cooling tower fails, it is easy to cause water accidents of the air separation tower...
Overpressure on the tower is very dangerous. If it is not handled in time, it will cause explosion on the tower. The main reason for the sudden rise o...
In boiling water when we can see, at atmospheric pressure, temperature to 100 ℃, water began to boil. But water not all at once into steam, but with t...
When the air separation Tower turns from normal temperature to low temperature, the phenomena such as pipe crack and valve jam often appear. The main ...
Air separation tower has the following requirements for Foundation:1) to ensure the level of the distillation column plate, the uneven settlement of t...
