Air separation manufacturer

The oxygen and nitrogen products produced by the air separation unit in the external compression process are low-pressure oxygen and nitrogen from the upper column, which are sent out of the cold box after being reheated by the heat exchanger. The product gas pressure out of the cold box is generally 0.12MPa. After being compressed to the pressure required by the user by the oxygen compressor, it is sent to the user’s pipeline. The internal compression process of oxygen is that liquid oxygen products are directly extracted from the condensing evaporator, compressed to the user's required pressure by the liquid oxygen pump in the cold box, and then sent to the user's pipeline after reheating and gasification by the heat exchanger.

1. The requirements of molecular sieve adsorber, electric heater and other equipment in place are the same as those of air cooling column of pre cooling system. 2. Process piping shall be constructed in strict accordance with relevant specifications and design and construction drawings. 3. The air tightness test shall be conducted before the valve is installed, and the test pressure and inspection standard shall be carried out according to the technical requirements of corresponding valves. 4. Pay attention to the direction of switch valve installation. V1201, V1202, V1207 and V1208 are front mounted valves, while V1203, V1204, V1205 and V1206 are reverse mounted valves. When the switch valve is installed, its shaft should be in a horizontal position, and the flange bolts should be evenly cross tightened. 5. The pipeline of pressure equalizing valve V1209 should have compensating bend.