At the installation site of the air separation plant, we may see a variety of operation methods. We may be a little surprised when we first see it. We...
The air contains 0.932% argon. When 99.6% oxygen is to be produced from the upper tower, 1.05% argon must be contained in the nitrogen discharge. From...
The load adjustment range of low pressure air separation plant is related to the adjustment performance of raw material air compressor, the adjustment...
The pressure value measured by the pressure gauge reflects the pressure level, but it is not the actual pressure. According to the working principle o...
According to different applications, nitrogen products are divided into three kinds: industrial gas nitrogen, pure nitrogen and high purity nitrogen....
At present, our government attaches great importance to the work of energy saving and emission reduction, and many binding targets such as China's ene...
With the increasingly wide application of cryogenic liquid, in order to reduce material cost, improve storage efficiency, reduce equipment floor area,...
Booster turbine expansion machine, the working medium of this unit is pressurized by the booster first, and then enters into the main heat exchanger a...
After the gas expands through the guide valve and the impeller, the airflow at the outlet of the impeller still has a certain speed. This part of kine...
Liquid oxygen, liquid nitrogen and liquid argon are widely used in liquid gasification stations to supply gas directly or fill bottles. In order to en...
During the process of storage and transportation, the liquid storage tank should pay attention to: 1) the protective equipment and instrument of the s...
Distillation is using the different boiling points of the two substances to condense the mixed steam and vaporize the mixed liquid repeatedly to achie...
