1) insufficient cooling water. The heat of the air is not enough to be taken away by the cooling water, resulting in the increase of the next level of...
After the cooling device runs for a period of time, the filling pebbles will gradually be compacted and sink due to the impact of air flow back and fo...
The liquid nitrogen supercooler uses the low temperature gas nitrogen from the upper tower to cool the liquid nitrogen from the lower tower, so as to ...
The applicable range of the working temperature of the molecular sieve is generally 8 ~ 15℃, within this range can work normally, once beyond this ran...
The temperature condition adjustment of the cooler (or switching heat exchanger) is based on the central temperature. The "middle" mentioned here does...
In the temperature of the forward air into the cooler (hot end temperature, related to the cooling effect of the last cooler of the air compressor or ...
The following two situations are common in the water inflow of the cooler (or switching heat exchanger:1) The water level of the air cooling tower of ...
Air compressor intermediate cooler is generally shell-tube structure. Water is supplied inside the pipe, and gas is supplied between the pipes, which ...
Nitrogen-water precooler is generally installed in all low-pressure air separation plant. It mainly uses the unsaturation of the water in the nitrogen...
When air enters into the cooler (or switching heat exchanger) through the last stage cooler of air compressor and nitrogen water precooler, the conten...
Liquid air and liquid nitrogen supercooler uses nitrogen as cold source to cool liquid air or liquid nitrogen. There are Pipe type and plate type cool...
