The most common failure of the liquid oxygen pump is the leakage of the seal. For the structure of mechanical seal, the key is the bad contact of the ...
Molecular sieve is a kind of crystal of siovenate, which has many micropores with uniform aperture size. The skeleton is usually negatively charged, a...
Water cooling tower is a hybrid heat exchanger. The purpose is to lower the temperature of cooling water in the cooling tower after cooling the air, s...
Cause and elimination method of oil leakage failure of air compressor of air separation plant: There are three types of common failures in the use of...
If the automatic adjustment system of the liquid level of the air cooling tower fails, it is easy to cause water accidents of the air separation tower...
Air separation equipment piston type liquid oxygen pump is widely used in liquid gasification station. The following requirements should be paid atten...
After the argon fraction is extracted from the top Tower, it enters into the crude argon tower and conducts the separation of oxygen and argon by the ...
Temperature difference is the power of heat transfer. As long as there is temperature difference between two materials, they will carry out the heat o...
In order to reduce the air temperature in the low temperature air separation unit, various heat exchange equipment are needed for cold and heat exchan...
1. It is easy to produce air hole when the flux is wet 2. If the welding speed is too fast, it is easy to produce welding porosity 3. Welding gas ho...
The quality of air separation plant installation is an important part to ensure the overall quality of air separation plant, so the safety of air sepa...
Users reported that the on-line analyzer of a 30000 grade air separation plant showed that the outlet CO₂of the molecular sieve suddenly increased fro...
