Surge is a kind of vibration under abnormal working condition when the flow of turbine compressor (also called vane compressor) decreases to a certain...
In the main tower of the air separation Tower, the distribution of argon varies with the position of the liquid inlet. The position of the liquid inle...
If the automatic adjustment system of the liquid level of the air cooling tower fails, it is easy to cause water accidents of the air separation tower...
Turbid milky white sediment is found in liquid oxygen, and the sediment is snow-like, volatilizing as the temperature rises, which is obviously caused...
The obvious symbol of freezing of the small air separation Tower heat exchanger is that the temperature difference at the Heat end increases, the pres...
The unit power consumption of the air separation plant is proportional to the unit power consumption of the air compressor (the power consumption of c...
The new small medium-pressure air separation plant adopts the turbine expander, which reduces the working pressure and saves energy consumption. Then,...
After the argon fraction is extracted from the top Tower, it enters into the crude argon tower and conducts the separation of oxygen and argon by the ...
The high pressure air inlet valve controls the air volume entering each compartment of the main heat exchanger respectively to adjust the temperature ...
1) before filling, the water on the base of the cold box should be dried;2) when filling, every equipment and pipeline in the air separation plant sho...
Both pressure test and leak detection are the air tightness inspection of the air separation plant. Its purpose is to examine the quality of installat...
Before filling the molecular sieve, check that the sieve bed can not leak the molecular sieve, otherwise it should be handled. Oil and other sundries ...
