The obvious symbol of freezing of the small air separation Tower heat exchanger is that the temperature difference at the Heat end increases, the pres...
The purification process of the molecular sieve is that before the compressed air enters into the cold box, it should first go through the molecular s...
The temperature condition adjustment of the cooler (or switching heat exchanger) is based on the central temperature. The "middle" mentioned here does...
In the temperature of the forward air into the cooler (hot end temperature, related to the cooling effect of the last cooler of the air compressor or ...
The following two situations are common in the water inflow of the cooler (or switching heat exchanger:1) The water level of the air cooling tower of ...
Under the design working condition, the positive and return air volume of the Heat section of the switching heat exchanger (or cooler) is basically eq...
Answer: On the one hand, the expansion heat exchanger is to reduce the temperature of the air after expansion by utilizing the cooling amount of the n...
The most likely leakage of switching heat exchanger is the welding line, especially the joint of the head and the pipeline. Most of the causes of leak...
The reasons why the liquid enters the heat exchanger when the small air separation plant is running are:1) during the start-up stage, the speed of clo...
When the purity of the product decreases or the output decreases during the operation of the air separation plant, people will think of whether the he...
When air enters into the cooler (or switching heat exchanger) through the last stage cooler of air compressor and nitrogen water precooler, the conten...
