Manufacturers direct air separation unit

1. Before connecting the pipe orifice of each container, clean white cloth shall be used to tie the orifice to prevent grease and dirt from entering. 2. When welding in the cold box and in the condensing evaporator, it is strictly forbidden for flame or arc to touch the surface of vessels and pipes. 3. The containers, valves, pipes and corresponding supports in the cold box, the surface of the cold box and the foundation surface shall not be stained with grease after installation, otherwise, degreasing treatment shall be carried out.

The air separation column mainly includes main heat exchanger, liquefier, distillation column, condensing evaporator, etc. The main heat exchanger, condensing evaporator and liquefier are plate type of heat exchangers. It is a new type of all aluminum metal composite partition heat exchanger. The average temperature difference is small, and the heat exchange efficiency is as high as 98-99%. Distillation column is the unit of air separation. The types of column unit are classified according to the internal parts. The sieve plate column with sieve plate, the bubble cap column with bubble cap plate, and the packed column with packing material. The sieve plate is widely used in air separation distillation column because of its simple structure, easy manufacture and high efficiency. Packed column is mainly used for distillation column with diameter less than 0.8m and height less than 7m. Bubble column is seldom used because of its complicated structure and difficult manufacture. Turbine