If the baffle is too thick the rectification effect will not be obvious, too large an aperture will cause too much fluid to flow from the centre of th
The method of non-linear mapping of the structural parameters of the plate-fin heat exchanger is based on the combination of experimental data derived
When the location of the baffle is different, the vortex development Chengdu and buffering effect is inversely correlated, the existence of the best
The main factor affecting the uneven distribution of the two-phase fluid is the re coefficient of the inlet meteorological fluid, as the re coefficien
Due to the heat exchanger logistics distribution characteristics factors, there are a variety of different improvement measures, mainly divided into t
Two-phase fluids have a significant impact on the heat transfer performance of the heat exchanger fluid. Two-phase fluids make the inhomogeneity even
Problems such as the annual of the fluid in the laminar flow area, condensation under variable loads and changes in the density of the fluid with temp
The main factors affecting the heat exchanger are: mechanical reasons, the guide and head of the plate and fin heat exchanger, in addition to the heig
The performance of a rectangular channel heat exchanger is greater than that of a triangular channel in terms of the influence of channel size, but th
When the core body resistance is large, through the improvement of the head structure is actually very small, so when the height of the heat exchanger
Heat exchanger core resistance to logistics resistance on the uneven distribution of logistics has a greater impact, when the core resistance is small
